LCD and Operation Panel

A: Network

Icons depicting the Wi-Fi setting and the network status indicate by the icon in the standby screen.

If the icon appears on the LCD, it indicates that Wi-Fi is enabled and the printer is connected to the wireless router.

Depending on the signal state, the icon will change.

	Signal strength: 81 % or more You can use the printer over Wi-Fi without any problems.
	Signal strength: 51 % or more The problem such as the printer cannot print may occur according to the network status. We recommend placing the printer near the wireless router.
	Signal strength: 50 % or less The problem such as the printer cannot print may occur. Place the printer near the wireless router.
	Wi-Fi is enabled but the printer is not connected to the wireless router.

Note

• Wireless Direct is enabled.

• Wi-Fi and Wireless Direct are disabled.

B: Battery information

When using the battery, the battery status appears by the icons.

The battery charging remaining is 75% to 100%.

The battery charging remaining is 50% to 70%.

The battery charging remaining is 25% to 45%.

The battery charging remaining is 20% or below.

Note

• This appears when the battery is charged by AC adapter.

• This appears when the battery charging remaining is 20% or below.

• This appears when the battery cannot be charged due to its temperature is high or low. When the battery icon appears as , the battery is not available.

• Select (Hint) on the HOME screen and then select Battery information to check the details of battery status.

  • Checking Battery Status on the LCD

C: Ink information

Display ink status.

• Checking Ink Status on the LCD

D: Setup

Select when setting, changing, or maintaining the printer.

(NEW) appears when there is an update notification of the printer.

E: Hint

Select when displaying the quick guide for how to load paper, how to resolve errors, or other information, when checking ink remaining level, or when displaying printer information.